Antari Onboard DMX Guía de usuario descargar pdf (Pagina 8)

Installation

Installing the Fogger

1. Remove all packing materials from the fog machine. Check that all foam and plastic padding is removed,

especially in the output area.

2. Place Low Fog Machine on a flat surface and remove fog liquid tank cap.

3. Fill the chamber with regular ice cubes or dry ice.

The chamber can hold as much as 8 kg ice cubes (fig 4).

4. Fill with ANTARI Low Fog Liquid (ordercode 60603)

or other high-quality water-based fog fluid. Any other

types of fluid can damage the unit. When filled, place

cap back on liquid tank.

5. When the chamber is filled, gently put the cover back.

Tighten the cover with appropriate force only.

6. Firmly attach the remote control cable to the proper input

on the rear of the machine.

7. Firmly attach the included tube to the drainage outtake,

place the end of the tube to a container (fig 5).

Fig. 4

The unit can only be operated at floor level or sitting on any regular surface.

It is important that the fog does not shoot directly at any one’s face. Therefore, do not point the output in a

direction that will aim directly at a person.

Whatever installation method you choose, do not allow the unit to have more than a 15 degree angle of

inclination.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Procedure :

1. Plug power cord into a grounded electrical outlet.

If necessary, turn power switch on rear of unit to “ON” position.

Warm-up is complete when green lamp lights up on remote unit.

2. To emit fog, press the button on the remote and hold for the

desired length of time.

3. The remote unit’s lamp will cycle on and off as the machine

re-heats to the proper operating temperature.

4. For further information on operating your

Antari Fog Machine, see Remote Control Operation.

Fig. 5

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Antari Onboard DMX Guía de usuario Pagina 8