Antari Onboard DMX Manual de usuario descargar pdf (Pagina 4)

♦

For further information on operating your Z-1500II, Z-3000II Fog Machine, see the section titled “Remote

Control Operation”.

CAUTION:

“Visibility during operation is reduced”

This model can be operated at a floor level or sitting on any regular surface. Whatever installation method you

choose, do not allow the unit to have more than 15 degree angle of inclination.

Important:

Always monitor tank fluid level as you are fogging. Running a fog machine with no fluid can

permanently damage the unit.

If your model includes a mounting bracket designed for overhead installation, it may be installed floor level

or suspended overhead. If the unit is to be mounted using the bracket, it is important that the fog does not

shoot directly at any one’s face. Whatever installation method you choose, do not allow the unit to have

more than a 15 degree angle or onclination.

Note: A fluid level sensor is installed on the unit. The machine will stop to fog if the fluid is lower than the

maximum level.

If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the

external fuse, remote control connection and power from the wall. If all of the above appears to be O.K., plug

the unit again. If fog does not come out after holding the remote button down for 30 seconds, check the hose

attached to the tank to make sure there is fluid going through the hose. If you are unable to determine the

cause of the problem, do not simply continue pushing the remote button, as this may damage the unit. Return

the machine to your ANTARI dealer.

Specifications

Model Number Z-1500II Z-3000II

Power Supply

AC100-120V, AC230/ 50HZ-60HZ AC100-120V, AC230/ 50HZ-60HZ

Power Consumption

1500 W 3000 W

Output Volume

ca. 700 m³/min. ca. 1400 m³/min.

Tank Capacity

6 Liter 6 Liter

Fluid Consumption

12 min./Liter 5 min./Liter

Weight

14 Kg 20 Kg

Dimensions(mm)

L 688 W 285 H188 L 735 W 310 H 192

Remote Included

Z-20 Z-20

Optional Remote

Z-30 Z-30

Control Module Operation

♦

Z-20: A 10 meter wired multi-function remote control with 5-pin XLR connector for ANTARI Fog Machine

models Z-1500II and Z-3000II. Its interface allows the operator to customize fog machine functions by adjusting

fogging duration, interval and volume. Its LCD displays current operating parameters, which are automatically

stored in non-volatile memory, allowing the machine to be powered down without losing function settings.

1 2 3 4 5 6 7

User Manual 2
0 - 5 = OFF 7

Comentarios a estos manuales

Sin comentarios

Antari Onboard DMX Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Máquina De Humo Antari Onboard DMX