Antari Onboard DMX Manual de usuario descargar pdf (Pagina 6)

DMX Setting for Z-series fog machines with onboard DMX

Channel A

250-255

6 - 249

0 – 5

0 - 5 = OFF

6 – 249 = Volume Control ( 5% - 95%)

250 – 255 = Maximum Volume Output ( 100%)

The Z-1200, Z-1500 and Z-3000 fog machines all have onboard DMX control. Currently all

three models use 1 channel to control volume output operation. Each channel has a value

range of 0 to 225. Timer functions such as duration and interval can be programmed using

the DMX controller or the DMX control software being used by lighting and effects operator.

If Channel A has a value from 0 to 5, the unit is OFF.

Between the values 6 to 249 the volume of fog output is regulated. With 6 being the

minimum volume of fog produced and 249 approaching the maximum. The volume output

rises as the DMX value is increased.

If Channel A has a value from 250 TO 255, the machine will operate at maximum

output.

Note: In the example above, if the machine were assigned the DMX address of 124, Channel

A would correspond to DMX address 124.

In general, Antari fog machines with onboard DMX conform to the following performance

specifications:

1. Average Operating temperature = 250ºC

2. Fogger can maintain maximum output for 30 seconds or more

3. Fogger can maintain constant output at 30% volume setting (roughly a value of 75).

1 2 3 4 5 6

Sin comentarios

Antari Onboard DMX Manual de usuario Pagina 6